An integrated liposome-based microfluidic strategy for rapid colorimetric analysis: A case study of microRNA-21 detection.

In this study, a novel integrated liposome-based microfluidic platform combined with a smartphone was designed for the rapid colorimetric detection of microRNA-21 (miRNA-21) in real samples. The flowing surface-functionalized liposomes were first captured by nucleic acid-functionalized Au nanoparticles in the microfluidic chip. In the presence of miRNA-21, the DNA strand modified on the surface of Au nanoparticles hybridized with the target to form double-stranded products and was cleaved by duplex-specific nuclease (DSN) enzyme, causing the liposomes to be re-released. Then, as the liposomes in the colorimetric module were lysed and the "cellular" contents were released, a step-by-step "glucose-glucose oxidase-3,3',5,5'-tetramethylbenzidine (TMB)" colorimetric reaction process catalyzed by the G-quadruplex/hemin was triggered. The grayscale values were recorded and recognized by the smartphone camera for miRNA-21 analysis. The advantages of the present strategy included the portability of smartphone-based colorimetric assay, the encapsulation and transport of reactants by liposomes and the low solvent usage of microfluidic chip. Under optimal conditions, this assay exhibited a wide linear range from 1 pM to 1 nM (r2 = 0.9981), and the limit of detection of miRNA-21 was as low as 0.27 pM. Moreover, the high specificity of this strategy allowed its successful application to the rapid analysis of miRNA-21 in real blood serum samples of people with type 2 diabetes.

A point-of-care electrochemical biosensor for the rapid and sensitive detection of biomarkers in murine models with LPS-induced sepsis.

Sepsis is a life-threatening condition, which is irreversible if diagnosis and intervention are delayed. The response of the immune cells towards an infection triggers widespread inflammation through the production of cytokines, which may result in multiple organ dysfunction and eventual death. Conventional detection techniques fail to provide a rapid diagnosis because of their limited sensitivity and tedious protocol. This study proposes a point-of-care (POC) electrochemical biosensor that overcomes the limitations of current biosensing technologies in the clinical setting by its integration with electrokinetics, enhancing the sensitivity to picogram level compared with the nanogram limit of current diagnostic technologies. This biosensor promotes the use of a microelectrode strip to address the limitations of conventional photolithographic fabrication methods. Tumor necrosis factor-alpha (TNF-α), interleukin-6 (IL-6), and microRNA-155 (miR-155) were monitored in a lipopolysaccharide (LPS)-induced septic mouse model. The optimum target hybridization time in a high conductivity medium was observed to be 60 s leading to the completion of the whole operation within 5 min compared with the 4-h detection time of the traditional enzyme-linked immunosorbent assay (ELISA). The limit of detection (LOD) was calculated to be 0.84, 0.18, and 0.0014 pg mL-1, respectively. This novel sensor may have potential for the early diagnosis of sepsis in the clinical setting.

Renewable Electrochemiluminescence Biosensor Based on Eu-MOGs as a Highly Efficient Emitter and a DNAzyme-Mediated Dual-drive DNA Walker as a Signal Amplifier for Ultrasensitive Detection of miRNA-222.

Herein, novel europium metal-organic gels (Eu-MOGs) with excellent cathode electrochemiluminescence (ECL) emission are first used to construct biosensors for the ultrasensitive detection of miRNA-222. Impressively, N and O elements of organic ligand 2,2':6,2″-terpyridine 4,4',4″-tricarboxylic acid (H3-tctpy) can perfectly coordinate with Eu3+ to form Eu-MOGs, which not only reduce nonradiative transition caused by the intramolecular free rotation of phenyl rings in other MOGs to enhance the ECL signal with extraordinary ECL efficiency as high as 37.2% (vs the [Ru(bpy)3]2+/S2O82- ECL system) but also reinforce ligand-to-metal charge transfer (LMCT) by the strong affinity between Eu3+ and N and O elements to greatly improve the stability of ECL signals. Besides, an improved nucleic acid cascade amplification reaction is developed to greatly raise the conversion efficiency from target miRNA-222 to a DNAzyme-mediated dual-drive DNA walker as output DNA, which can simultaneously shear the specific recognition sites from two directions. In that way, the proposed biosensor can further enhance the detection sensitivity of miRNA-222 with a linear range of 10 aM-1 nM and a detection limit (LOD) of 8.5 aM, which can also achieve an accurate response in cancer cell lysates of MHCC-97L and HeLa. Additionally, the biosensor can be self-regenerated by the folding/unfolding of related triplets with pH changes to simplify experimental operations and reduce the cost. Hence, this work proposed novel MOGs with stable and intense ECL signals for the construction of a renewable ECL biosensor, supplying a reliable detection method in biomarker analysis and disease diagnosis.

Flexible-Arranged Biomimetic Array Integrated with Parallel Entropy-Driven Circuits for Ultrasensitive, Multiple, and Reliable Detection of Cancer-Related MicroRNAs.

With the emergence of microRNA (miRNA) as a promising biomarker in cancer diagnosis, it is significant to develop multiple analyses of miRNAs. However, it still faces difficulties in ensuring the sensitivity and accuracy during multiplex detection owing to the low abundance and experimental deviation of miRNAs. In this work, a flexible-arranged biomimetic array integrated with parallel entropy-driven circuits (EDCs) was developed for ultrasensitive, multiplex, reliable, and high-throughput detection of miRNAs. The biomimetic array was fabricated by arrangement of various photonic crystals (PCs) for adjustable photonic band gaps (PBGs) and specific fluorescence enhancement. Meanwhile, two cancer-related miRNAs and one reference miRNA were introduced as multiple analytes as a proof-of-concept. The parallel EDCs with negligible crosstalk were designed based on the modular property. Because of the one-to-one match between the emitted fluorescence of parallel EDCs and the PBGs of the flexible-arranged biomimetic array, the generated fluorescence signal triggered by target miRNAs can be enhanced on the corresponding domain of the array. Furthermore, the amplified signal of the array was detected with high-throughput scanning, which could reveal specific information on cancer-related miRNAs as well as reference miRNA, enhancing the abundance and reliability of the analysis. The proposed array has the merits of a modular design, flexible deployment, simple operation (nonenzymatic and isothermal), improved accuracy, high sensitivity, and multiplex analysis, showing potential in disease diagnosis.

Effect of miR-590-3p/DKK1 Axis on the Progression of Wilms’ Tumour

Background: Wilms’ tumour is the most prevalent abdominal malignancy in children. This study focused on the mechanism of the miR-590-3p/Dickkopf 1 (DKK1) axis in Wilms’ tumour. Methods: The mRNA levels of miR-590-3p and DKK1 in 49 pairs of Wilms’ tumour pathological specimens and normal tissues were determined using real-time quantitative polymerase chain reaction (RT-qPCR). Wilms’ tumour cells’ invasion ability and proliferative ability were assessed using a Transwell assay and Cell Counting Kit-8 (CCK-8) assay, respectively. Dual-luciferase assay was performed to evaluate the potential relationship between miR-590-3p and DKK1 in Wilms tumour. Furthermore, a mouse transplanted tumour model was constructed to explore the function of miR-590-3p inhibitor on Wilms’ tumour growth in vivo. Results: DKK1 emerged as a target gene of miR-590-3p in Wilms’ tumour. DKK1 expression was downregulated (p < 0.01), but miR-590-3p was overexpressed (p < 0.01) in Wilms’ tumour tissues compared to normal tissues. miR-590-3p overexpression accelerated Wilms’ tumour invasive ability and cell proliferation (p < 0.01). Additionally, DKK1 partially reversed miR-590-3p-induced proliferation (p < 0.05) and invasion ability (p < 0.01). Furthermore, downregulation of miR-590-3p restrained the growth rate of transplanted tumours in nude mice (p < 0.01). Conclusions: Through the regulation of DKK1, miR-590-3p accelerated the invasion and proliferation of Wilms’ tumour. The study suggests that the miR-590-3p/DKK1 axis represents a novel mechanism in Wilms’ tumour. (AU)

Isothermal strand displacement polymerase reaction (ISDPR)-assisted microchip electrophoresis for highly sensitive detection of cancer associated microRNAs.

More and more studies have found that microRNAs (miRNAs) are markers of cancer, and detection of miRNAs is beneficial for early diagnosis and prognosis of cancer. In this paper, the isothermal strand displacement polymerase reaction (ISDPR), which is an enzyme-assisted nucleic acid amplification method, was studied to combine with microchip electrophoresis (MCE) for a simultaneously detection of two cancer related miRNAs named microRNA-21 (miR-21) and microRNA-221 (miR-221). In the ISDPR amplification, two different DNA hairpins (HPs) were specifically designed, so that miR-21 and miR-221 could respectively bind to HPs and started ISDPR amplification to generate two different products which were ultimately detected by MCE. The optimal conditions of ISDPR were carefully investigated, and the limits of detection (LOD) of miR-21 and miR-221 were as low as 0.35 fM and 0.25 fM (S/N = 3) respectively under these conditions. The human lung tumor cells and serum samples were analyzed by this ISDPR-MCE method and satisfactory results were obtained, which means that this method is of high sensitivity, high efficiency, low reagent consumption and simple operation in miRNAs detection.

Thermophoretic Aggregation Imaging of Tumor-Derived Exosomes by CRISPR-Cas13a-Based Nanoprobes.

The inherent heterogeneity of tumor-derived exosomes holds great promise for enhancing the precision of cancer diagnostics. MicroRNAs (miRNAs) encapsulated in tumor-associated exosomes have emerged as valuable biomarkers for the early detection of cancers. Nevertheless, the flexible structure and inherent instability of RNA limit its application in biological diagnostics. The CRISPR-Cas13a system, distinguished by its target-responsive "collateral effect", represents a powerful tool for advancing cancer diagnostics. In this study, we harness the CRISPR-Cas13a system as an innovative signal amplification tool to image cancer-related exosomal miRNA in situ. Furthermore, we capitalize on the thermophoretic aggregation effect exhibited by gold nanoparticles (Au NPs) to consolidate the fluorescent signals generated by the CRISPR-Cas13a system. Subsequently, the developed nanoprobe is applied to detect lung cancer-related exosomal miRNA from human serum, enabling the aggregated visualization of low-abundance cancer exosomes in individuals with lung cancer compared with healthy individuals. This sensitive thermophoretic aggregation assay provides a diagnostic tool for lung cancer in the clinic.

Amplification-Free Analysis of Bladder Cancer MicroRNAs on Wrinkled Silica Nanoparticles with DNA-Functionalized Quantum Dots.

Bladder cancer (BC) occurrence and progression are accompanied by alterations in microRNAs (miRNAs) expression levels. Simultaneous detection of multiple miRNAs contributes to the accuracy and reliability of the BC diagnosis. In this work, wrinkled silica nanoparticles (WSNs) were applied as the microreactor for multiplex miRNAs analysis without enzymes or nucleic acid amplification. Conjugated on the surface of WSNs, the S9.6 antibody was adopted as the universal module for binding DNA/miRNA duplexes, regardless of their sequence. Furthermore, single-stranded DNA (ssDNA) was labeled with quantum dots (QDs) for identifying a given miRNA to form QDs-ssDNA/miRNA, which enabled the specific capture of the corresponding QDs on the wrinkled surface of WSNs. Based on the detection of fluorescence signals that were ultimately focused on WSNs, target miRNAs could be sensitively identified to a femtomolar level (5 fM) with a wide dynamic range of up to 6 orders of magnitude. The proposed strategy achieved high specificity to obviously distinguish single-base mutation sequences and possessed multiplex assay capability. Moreover, the assay exhibited excellent practicability in the multiplex detection of miRNAs in clinical serum specimens.

A dual-core 3D DNA nanomachine based on DNAzyme positive feedback loop for highly sensitive MicroRNA imaging in living cells.

A double 3D DNA walker nanomachine by DNAzyme self-driven positive feedback loop amplification for the detection of miRNA was constructed. This method uses two gold nanoparticles as the reaction core, and because of the spatial confinement effect the local concentration of the reactants increase the collision efficiency was greatly improved. Meanwhile, the introduction of positive feedback loop promotes the conversion efficiency. In presence of miRNA-21, a large amount of DNAzyme was released and hydrolyze the reporter probe, resulting the recovery of fluorescence signal. The linear range for miRNA-21 is 0.5-60 pmol/L, and the detection limit is 0.41 pmol/L (S/N = 3). This nanomachine has been successfully used for accurate detection of miRNA-21 expression levels in cell lysates. At the same time, it can enter cells for intracellular miRNA-21 fluorescence imaging, distinguishing tumor cells from normal cells. This combination of in vitro detection and imaging analysis of living cells can achieve the goal of jointly detecting cancer markers through multiple pathways, providing new ideas for early diagnosis and screening of diseases.

Programmable DNA barcode-encoded exponential amplification reaction for the multiplex detection of miRNAs.

Multiple analysis of miRNAs is essential for the early diagnosis and monitoring of diseases. Here, a programmable, multiplex, and sensitive approach was developed for one-pot detection of miRNAs by melting temperature encoded sequences and exponential isothermal amplification (E-EXPAR). In the presence of target miRNAs, the corresponding templates initiate the cycles of nicking and polymerization/displacement, generating numerous barcode strands with unique encoding sequences. Subsequently, generated barcode strands hybridize with fluorescent probes and quench the fluorophore by a triplet of G base through a photo-induced electron transfer mechanism. Finally, a melting curve analysis is performed to quantify miRNAs by calculating the rate of fluorescence change at the corresponding melting temperature. Based on this, miRNA-21, miRNA-9, and miRNA-122 were detected with the detection limits of 3.3 fM, 2.9 fM, and 1.7 fM, respectively. This E-EXPAR was also employed to simultaneously detect three miRNAs in biological samples, showing consistent results with RT-qPCR. Overall, this study provides a programmable and universal platform for multiplex analysis of miRNAs, and holds great promise as an alternative to the multiplex analysis in clinical diagnostics and prognostics for nucleic acid detection.

Bringing to Light the Importance of the miRNA Methylome in Colorectal Cancer Prognosis Through Electrochemical Bioplatforms.

This work reports the first electrochemical bioplatforms developed for the determination of the total contents of either target miRNA or methylated target miRNA. The bioplatforms are based on the hybridization of the target miRNA with a synthetic biotinylated DNA probe, the capture of the formed DNA/miRNA heterohybrids on the surface of magnetic microcarriers, and their recognition with an antibody selective to these heterohybrids or to the N6-methyladenosine (m6A) epimark. The determination of the total or methylated target miRNA was accomplished by labeling such secondary antibodies with the horseradish peroxidase (HRP) enzyme. In both cases, amperometric transduction was performed on the surface of disposable electrodes after capturing the resulting HRP-tagged magnetic bioconjugates. Because of their increasing relevance in colorectal cancer (CRC) diagnosis and prognosis, miRNA let-7a and m6A methylation were selected. The proposed electrochemical bioplatforms showed attractive analytical and operational characteristics for the determination of the total and m6A-methylated target miRNA in less than 75 min. These bioplatforms, innovative in design and application, were applied to the analysis of total RNA samples extracted from cultured cancer cells with different metastatic profiles and from paired healthy and tumor tissues of patients diagnosed with CRC at different stages. The obtained results demonstrated, for the first time using electrochemical platforms, the potential of interrogating the target miRNA methylation level to discriminate the metastatic capacities of cancer cells and to identify tumor tissues and, in a pioneering way, the potential of the m6A methylation in miRNA let-7a to serve as a prognostic biomarker for CRC.

A dual-signal amplification strategy based on rolling circle amplification and APE1-assisted amplification for highly sensitive and specific miRNA analysis for early diagnosis of alzheimer's disease.

MicroRNA (miRNA) is involved in the progression of Alzheimer's disease (AD) and emerges as a promising AD biomarker and therapeutic target. Therefore, there is an urgent need to develop convenient and precise miRNA detection methods for AD diagnosis. Herein, a dual-signal amplification strategy based on rolling circle amplification and APE1-assisted amplification for miRNA analysis for early diagnosis of AD was proposed. The strategy consisted of dumbbell-shaped probe (DP) as amplification template and a reporter probe (RP) with an AP site modification. In the presence of the target miRNA, the miRNAs bound to the toehold domain of DP and DP was activated into a circular template. Then, RCA reaction was triggered, producing a large number of long-stranded products containing repeated sequences. After RCA, APE1 enzyme recognized and removed AP site in the complex of RCA/RP products. By coupling RCA with APE1-assisted amplification, this method has high sensitivity with the limit of detection (LOD) of 1.82 fM. Moreover, by using DP as template for RCA reaction, high specificity can be achieved. By detecting miR-206 in serum using this method, the expression of miR-206 can be accurately distinguished between AD patients and healthy individuals, indicating that this method has broad application prospects in clinical diagnosis.

A rapid one-step electrochemical method based on cleat-equipped molecular walking machine.

Various nucleic acid molecular machines have emerged in recent years. However, when the nucleic acid tracks are fully depleted, these walkers are highly susceptible to premature release or stalling in regions where the tracks are locally exhausted. In this work, a molecular walking machine with a cleat domain preventing dissociation from the track was explored for ultrasensitive detection of miRNA. It has been verified that the cleat design can enhance the signal amplification efficiency of molecular walking machines for electrochemical miRNA-141 detection. Notably, the single-step electrochemical biosensing platform utilizing the cleat-equipped molecular walking machine (CMWM) is exceptionally straightforward and rapid, concluding the reaction within 90 min and achieving a remarkable low detection limit of 0.26 fM. The proposed molecular walking machine with this specific cleat structure was utilized for the identification of miRNA-141 in cellular lysates, exhibiting remarkable selectivity and consistent reproducibility, showcasing its effective utility in bioanalysis. Therefore, the cleat walker developed in this study introduces an innovative method for constructing a miRNA electrochemical biosensing platform, offering new perspectives for its application in biomolecule detection and clinical disease diagnosis.

Dual-responsive 3D DNA nanomachines cascaded hybridization chain reactions for novel self-powered flexible microRNA-detecting platform.

The microRNA-21 is closely related to chromatin remodeling and epigenetic regulation. In this work, an efficient double-response 3D DNA nanomachine (DRDN) was assembled by co-immobilizing two different lengths of hairpin DNA on the surface of gold nanoparticles (AuNPs) to capture microRNA-21 (miRNA-21), recycle miRNA-21, and trigger hybridization chain reactions (HCR). This work reports the fabrication of a laser-scribed graphene (LSG) electrode with excellent flexibility and electrical conductivity by laser-scribing commercial polyimide films (PI). The as-proposed self-powered biosensing platform presents significantly increased instantaneous current to in real-time monitor miRNA-21 by a capacitor. The biosensing platform exhibited highly sensitive detection of miRNA-21 with a detection limit of 0.142 fM in the range of 0.5 fM to 1 × 104 fM, and demonstrated high efficiency in the analysis of the tumor markers.

Target-Responsive DNA Nanoclaw for the On-Site Identification of Chinese Medicines with Naked Eye.

The identification of Chinese medicinal herbs occupies a crucial part in the development of the food and drug market. Although molecular identification based on real-time PCR offers good versatility and uniform digital standards compared with traditional methods, such as morphology, the dependence on large-scale equipment hinders spot detection and marketable applications. In this study, we developed a DNA nanoclaw for colorimetric detection and visible on-site identification of Chinese medicines. When specific miRNA is present, the DNAzyme is activated and cleaves the substrate strand, triggering the catalytic hairpin assembly (CHA) reaction and forming branched DNA junctions on AuNP-I. This can then capture AuNP-II through hybridization and facilitate their aggregation, resulting in a noticeable color change that is observable to the naked eye. By harnessing the dual amplification of DNAzyme and CHA, this highly sensitive nanoprobe successfully achieved specific identification of Chinese medicines. This offers a new perspective for on-site testing in the herbal market.

Portable fluorescent lateral flow assay for ultrasensitive point-of-care analysis of acute myocardial infarction related microRNA.

Point-of-care quantitative analysis of tracing microRNA disease-biomarkers remains a great challenge in the clinical diagnosis. In this paper, we developed a portable fluorescent lateral flow assay for ultrasensitive quantified detection of acute myocardial infarction related microRNAs in bio-samples. SiO2@DQD (bilayer quantum dots assembly with SiO2 core) based fluorescent lateral flow strip was fabricated as the analysis tool. In order to quantify the tracing microRNA in biosamples, a catalytic hairpin assembly and CRISPR/Cas12a cascade amplification method was performed and combined with the fabricated SiO2@DQD lateral flow strip. Thus, our platform gathered double advantages of portability and ultrasensitive quantification. Based on our strips, target myocardial biomarker microRNA-133a can be detected with a detection limit of 0.32 fM, which was almost 1000-fold sensitive compared with previous reported microRNAs-lateral flow strips. Significantly, this portable fluorescent strip can directly detect microRNAs in serum without any pretreatment and PCR amplification steps. When spiked in serum samples, a recovery of 99.65 %-102.38 % can be obtained. Therefore, our method offers a potential tool for ultrasensitive quantification of diseases related microRNA in the point-of-care diseases diagnosis field.

Precise quantification of microRNAs based on proximity ligation of AuNPs-immobilized DNA probes.

MiRNAs are critical regulators of target gene expression in many biological processes and are considered promising biomarkers for diseases. In this study, we developed a simple, specific, and sensitive miRNA detection method based on proximity ligation reaction, which is easy to operate. The method uses a pair of target-specific DNA probes immobilized on the same gold nanoparticles (AuNPs), which hybridize to the target miRNA. Hybridization brings the probes close together, allowing the formation of a continuous DNA sequence that can be amplified by Quantitative Real-time PCR (qPCR). This method eliminates the need for complex reverse transcription design and achieves high specificity for discriminating single base mismatches between miRNAs through a simple procedure. This method can sensitively measure three different miRNAs with a detection limit of 20 aM, providing high versatility and sensitivity, even distinguishing single-base variations among members of the miR-200 family with high selectivity. Due to its high selectivity and sensitivity, this method has important implications for the investigation of miRNA biological functions and related biomedical research.

SERS-electrochemical dual-mode detection of microRNA on same interface assisted by exonuclease III signal transformation.

Dual-mode sensing has attracted more attentions which provide more accurate and reliable approach of cancer-related biomarkers. Herein, we developed a novel SERS/electrochemical dual-mode biosensor for miRNA 21 detection based on Exo III-assisted signal transformation. Firstly, the Au NPs were deposited on electrode as SERS substrate and Mn3O4/S4(DNA signal strand) was modified on Au NPs/S5 by the DNA strands S5-S4 pairing principle as hydrogen peroxide catalyst, leading to an obviously high DPV electrical signal without Raman signal. Subsequently, the presence of miRNA 21 will activate the Mn3O4/S4 to be decomposed under exonuclease III-assisted process, then the S3' chains modified with Raman molecular Cy3(Cy3-S3') is continuously connected to the Au NPs/S5 by DNA stands S5-S3' pairing principle, leading to the Raman signal response and DPV signal reduction. The biosensor shows good linear calibration curves of both SERS and electrochemical sensing modes with the detection limit of 3.98 × 10-3 nM and 6.89 × 10-5 nM, respectively. This work finds an ingenious mode for dual detection of microRNA on a same interface, which opens a new strategy for SERS and electrochemical analysis.

A MoS2 nanosheet-based CRISPR/Cas12a biosensor for efficient miRNA quantification for acute myocardial infarction.

Acute myocardial infarction (AMI) represents the leading cause of cardiovascular death worldwide, and it is thus pivotal to develop effective approaches for the timely detection of AMI markers, especially possessing the characteristics of antibody-free, signal amplification, and manipulation convenience. We herein construct a MoS2 nanosheet-powered CRISPR/Cas12a sensing strategy for sensitive determination of miR-499, a superior AMI biomarker to protein markers. The presence of miR-499 at a trace level is able to induce a significantly enhanced fluorescence signal in a DNA-based molecular engineering platform, which consists of CRISPR/Cas12a enzymatic reactions and MoS2 nanosheet-controllable signal reporting components. The MoS2 nanosheets were characterized by using atomic force microscopy (AFM) and transmission electron microscope (TEM). The detection feasibility was verified by using polyacrylamide gel electrophoresis (PAGE) analysis and fluorescence measurements. The detection limit is determined as 381.78 pM with the linear range from 0.1 ⅹ 10-9 to 13.33 ⅹ 10-9 M in a fast manner (about 30 min). Furthermore, miRNA detection in real human serum is also conducted with desirable recovery rates (89.5 %-97.6 %), which may find potential application for the clinic diagnosis. We describe herein the first example of MoS2 nanosheet-based signal amplified fluorescence sensor for effective detection of AMI-related miRNA.

Multiplexed miRNA and Protein Analysis Using Digital Quantitative PCR in Microwell Arrays.

Proteins and microRNAs (miRNAs) act in tandem within biological pathways to regulate cellular functions, and their misregulation has been correlated to numerous diseases. Because of their interconnectedness, both miRNAs and proteins must be evaluated together to obtain accurate insights into the molecular pathways of pathogenesis. However, few analytical techniques can measure both classes of biomolecules in parallel from a single biological sample. Here, microfluidic digital quantitative PCR (dqPCR) was developed to simultaneously quantify miRNA and protein targets in a multiplexed assay using a single detection chemistry. This streamlined analysis was achieved by integrating base-stacking PCR and immuno-PCR in a microfluidic array platform. Analyses of let-7a (miRNA) and IL-6 (protein) were first optimized separately to identify thermocycling and capture conditions amenable to both biomolecules. Singleplex dqPCR studies exhibited the expected digital signals and quantification cycles for both analytes over a range of concentrations. Multiplexed analyses were then conducted to quantify both let-7a and IL-6 with high sensitivity (LODs ∼ 3 fM) over a broad dynamic range (5-5000 fM) using only standard PCR reagents. This multiplexed dqPCR was then translated to the analysis of HEK293 cell lysate, where endogenous let-7a and IL-6 were measured simultaneously without sample purification or pretreatment. Collectively, these studies demonstrate that the integration of BS-PCR and immuno-PCR achieves a sensitive and streamlined approach for multiplexed analyses of miRNAs and proteins, which will enable researchers to gain better insights into disease pathogenesis in future applications.